Carriage house
Raised-panel steel
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Irvine?
Spring replacement in Irvine typically costs $180 to $340 for a standard torsion or extension spring job, and most single-spring replacements land near the middle of that range at $180 to $340 depending on spring type, door weight, and whether both springs are replaced at once. Torsion springs on heavier two-car doors run at the higher end; extension springs on lighter single-car doors sit lower. If a snapped spring has also bent a cable or knocked a track out of alignment, repair is quoted together and the total moves into the $300 to $600 range.
We work on your brand, whether that’s a Clopay door with a LiftMaster opener or a Wayne Dalton setup with an older Genie motor, and we quote the spring work on its own so you can see exactly what a replacement costs before anything else is added.
Spring Replacement Cost Breakdown (2026)
Here’s how spring and the closely related repair work prices out in Irvine this year. These are the ranges we quote to homeowners across the city, from Northwood to Turtle Rock.
| Service | Typical Irvine Range (2026) | What It Covers |
|---|---|---|
| Spring Repair / Replacement (single) | $180 – $340 | One torsion or extension spring, labor, balance test |
| Spring Replacement (both springs) | $320 – $600 | Matched pair, recommended on two-car doors |
| Cable Repair | $130 – $250 | Frayed or snapped lift cable, drum re-seat |
| Roller Replacement | $110 – $220 | Set of rollers, quieter and smoother travel |
| Track Realignment | $120 – $240 | Bent or shifted track brought back to true |
| Panel Replacement | $250 – $500 | One damaged section, color and profile matched |
| Opener Repair | $120 – $320 | Motor, sensor, gear, or logic board diagnosis |
| Opener Installation | $250 – $550 | New opener, rail, brackets, safety sensors |
| Garage Door Repair (general) | $150 – $600 | Mixed issues quoted together |
| New Door Installation | $700 – $2,200 | Door, hardware, spring system, standard sizes |
What pushes a spring job up: a heavier insulated door, a high-lift or unusual track configuration, both springs being replaced as a matched pair, and any cable or drum damage found once the door is open. What brings it down: a single extension spring on a light door, springs that fail cleanly with no collateral damage, and a door that was already balanced and well maintained. We don’t inflate a spring quote with parts the door doesn’t need. If the rest of the system is sound, we say so.
What Affects Spring Replacement Pricing in Irvine
Irvine doors don’t all age the same way, and the neighborhood you’re in shapes what we find when we open the door up. Here are the factors that move the price most.
- Spring type and count. Torsion springs (mounted above the door on a shaft) cost more to replace than extension springs (mounted alongside the track), and most two-car doors in Irvine carry two torsion springs. Replacing the pair at once is the right call when they were installed at the same time, since they’ve lived identical cycles and the second one usually fails within months of the first.
- Door weight and insulation. Insulated steel and carriage-house style doors are heavier than basic uninsulated panels, and heavier doors need higher-cycle springs. In neighborhoods like Woodbridge and Westpark, where many homes have upgraded to insulated carriage doors, that extra weight shows up in the spring spec and the labor.
- Coastal air and cycle count. Irvine’s inland edge is dry, but homes closer to the coast in areas like Turtle Rock and Quail Hill see more salt air and humidity, which speeds up corrosion on springs and cables. A daily-driven two-car door also racks up cycles faster than a single-car door, and springs are rated in cycles, so a busy household burns through them sooner.
- Collateral damage. When a spring snaps, the door drops fast. That can twist a cable, bend a track, or strain the opener. If the door came down hard, we check all of it, because a spring-only quote that ignores a warped track just means a second service call later.
- Age and brand of the door system. We’re fluent across Clopay, Amarr, Wayne Dalton, Raynor, and the openers that came with them (LiftMaster, Chamberlain, Genie, Craftsman). Older doors sometimes need matched hardware, and knowing the brand means we bring the right parts the first time instead of making a second trip.
- Torsion conversion. Some older Irvine homes still have extension springs. Converting to a torsion system is a bigger job, but it’s safer and quieter and often the smarter long-term spend. We’ll walk you through whether it makes sense for your door.
One more thing worth saying plainly: garage door springs are under extreme tension, and a spring that lets go while someone is working on it can cause serious injury. This is one of the few home repairs we’d tell a capable DIYer to leave alone. A trained technician has the winding bars, the door secured, and the experience to do it safely.
How to Save on Spring Replacement
Spring replacement isn’t the place to chase the lowest bid, but there are real ways to keep the number down without cutting corners.
- Replace both springs at once. If one of a matched pair has failed, the second is on borrowed time. Doing both in one visit costs less than two separate service calls, and it means one labor charge instead of two.
- Schedule before it snaps. A spring that’s stretched, gapped, or making a loud bang at the end of travel is a spring on its way out. Replacing it before it fails avoids the cable and track damage that turns a $180 – $340 job into a $300 – $600 one.
- Bundle maintenance. If your rollers are worn or the track needs a tweak, folding that into the spring visit saves a return trip. Roller replacement ($110 – $220) and track realignment ($120 – $240) done alongside spring work cost less than booking them separately.
- Ask about spring cycle rating. A higher-cycle spring costs a little more up front but lasts far longer. Over the life of the door, it’s usually the cheaper choice. We’ll show you the options.
- Get a free estimate. Call (866) 472-7503 for a free estimate. We diagnose the actual failure and quote the real number, not a range that creeps up once the door is open.
We handle garage door repair and opener work under one roof, so if a failed spring has also worn out the opener, you’re not coordinating two companies. One call resolves both halves of the system. If you’re comparing what spring work costs in nearby markets, our guide to Spring Replacement in Costa Mesa breaks down how pricing compares across the county.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Irvine?
Spring replacement in Irvine runs $180 to $340 for a single spring and $320 to $600 when both springs of a matched pair are replaced. The final number depends on spring type, door weight, and whether the failure caused any cable or track damage. Call (866) 472-7503 for an exact quote; estimates are free.
Is it cheaper to repair or replace a garage door spring?
Repairing (replacing the spring) is almost always cheaper than replacing the door. A spring job at $180 to $340 is far less than a new door at $700 to $2,200, and a sound door with a failed spring needs the spring, not a new door. We only recommend a new door when the panels, frame, or structure are also compromised.
Can you come today if my spring broke?
In most cases, yes, we can get to a broken spring quickly. A snapped spring leaves the door unusable and, if it’s a main entry, a security concern, so we prioritize those calls. Call (866) 472-7503 and we’ll find the soonest opening for your Irvine address.
Do I need to replace both springs at once?
You should replace both springs together if they were installed as a matched pair and one has already failed. The second is usually close behind, and replacing it now avoids a second service call and the risk of the door dropping again. Doing both together typically lands at $320 to $600.
Why did my spring break and can I prevent it?
Springs break from cycle fatigue, corrosion, and metal wear, not from anything you did wrong. A 10,000-cycle spring on a daily-driven door simply reaches its limit over years of use. Keeping the door balanced, lubricating moving parts, and replacing springs before they snap are the best prevention. In Irvine’s coastal-adjacent neighborhoods, wiping down springs and cables to slow salt corrosion also helps.
Why Irvine Homeowners Call Us for Spring Work
A garage door is about 30% of what people see when they pull up to your house, and the spring is what makes that door move safely every day. We treat it that way. We’re fluent across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so whatever’s on your Irvine home, we diagnose it correctly the first time. We handle both the door structure and the opener, so a worn spring and a straining motor get sorted in one visit, not handed off to a second contractor. Our recommendations are driven by what fits your home and your budget, not by a dealer pushing one product line. The right door and the right spring for your house, installed to last, is the whole idea behind the Carriage House name.
Call (866) 472-7503 for a free estimate on spring replacement or any garage door repair in Irvine. We’ll give you a straight answer and a fair number.
Pricing reflects the Irvine market as of 2026. Carriage House Garage Door Co offers free estimates – call (866) 472-7503.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Carmen Morales"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
— Whitney Anderson"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
— Nisha Sharma